Inflatable boats from Ukrainian manufacturer Fiord-Boat: motor boat Fortune 340 Fiord-Boat inflatable boat - where can I buy?

inflatable boats manufacturer

Welcome to the world of Fiord-Boat inflatable boats!

Inflatable Motor boat Fortune 340

foldable inflatable boat Fortune 340
Look at price of boat

Inflatable Fishing boat Fortune 340

Technical Data

We use boat-quality, Supported Polyester Fabric with PVC coating 1100 gr per sq.m, LG (South Korea)
Inflation valves, Equipment : Scoprega, Ceredi (Italy)
CE Certificate:
others
Ingenieurburo Capt. Muller (Germany),
Shipping Register of Ukraine
Warranty: 2 years from the date of original purchase
Ext./Int. Length, m 3,40/2,33
Ext./Int.Beam, m 1,75/0,81
!!! enlarged diameter Buoyancy Tube dia, m 0,45side 0,40bow
from 40 to 45cm Payload, kg, according to ISO6185 555
boat photos
consumer opinion, photos
Max. Person Capacity 4
Air Chambers 3 + inflatable keel
Recommend engine pover, HP 15
Max. HP 25
Stowed dimensions, m 1,25 0,65 0,36
0,95 0,66 0,15
Weight, kg from PVC 1100 gr per sq.m 37 boat + 28 deck

thwart fastening

fishing boat thwart fastening

thwart will not slip out at any waves - its hook is tightly clamped by inflated tubes
inflatable fishing boat thwart

F340 is 4-person foldable inflatable boat with inflatable keel and hard deck. This inflatable boat is good choice for water walks with a family, bosom pals, for fans of fishing with a spinning, for a command of divers. Capacious, stable, reliable. It's Marine quality plywood deck & inflatable keel provide fine longitudinal and cross-section rigidity, so, high-speed maneuverability, good seaworthy qualities, stability of a boat on a course, handiness.

5 sections boats folding deck provide light assembly/disassembly (the dural profiles are fixed on adjacent end faces of deck sections). Assemblage to readiness occupies no more than 20-25 minutes. Additional longitudinal rigidity of a boat is provided by 2 deck a dural profile stringers.

The inflatable boat is supplied in 2 carry bags: plywood is packed separately from an inflatable part, this prevents damage boat soft part against rigid parts during packing and transportation.

Deck sections and thwarts are made of waterproof laminated plywood.

The profile rubbing strake along the board of boat makes it possible not to fear the damage of pneumatic balloon during the careless mooring and, furthermore, it works as antisplash guard.

There are guides for the mooring and the anchor lines on the bow, they protect the boat tube from the abrasion causing through contact with the fixed cord.

Oarlocks have bronze bushing. Oarlocks can serve as fittings for the installation of awning.

fishing boat oarlock


Standard equipment: boat comes with a 5 l foot pump, pump adapter, 2 oars with the holders in the oarlock, repair kit, printed users manual.
Useful boat accessories: bimini top, bow bag for the tackle, the bag-pad (this bag is hung up under the thwart, serves as the cushiony mat on thwart), life vest, mooring cables, boat anchor...Look at boat accessories

Inflatable boat with installed weatherproof tent


Load price-list
  • Inflatable dinghies & inflatable tenders (length from 1,95m to 3,3m)
    inflatable-boats-en-e4.pdf  304K - Open
  • Inflatable sportboats & versatiles, RIBs(length from 3m to 5m)
    inflatable-boats-en-e6.pdf 278K - Open