inflatable boats manufacturer
|The producer of the inflatable boats Fiord-Boat greets you!|
Tender boat Jeannine 300k
|To look the price of pvc boat, to compare with others|
Inflatable tender boat Jeannine 300k
|We use boat-quality, Supported Polyester Fabric with PVC coating||900 or 1100 gr per sq.m,|
LG (South Korea)
|Inflation valves, Equipment :||Borika (Ukraine)|
|Ingenieurburo Capt. Muller (Germany),|
Shipping Register of Ukraine
|Warranty:||2 years from the date of original purchase|
|Ext./Int. Length, m||3,00/2,10|
|!!! enlarged diameter||Buoyancy Tube dia, m||0,41|
|from 37 to 41cm||Payload, kg, according to ISO6185||440|
|Max. Person Capacity||3|
|Air Chambers||3 +inflatable keel|
|Recommend engine pover, HP||8|
|Max. outboard HP||10|
|Stowed dimensions, m||0,95 х 0,60 х 0,35 + 0,85 x 0,6 х 0,1|
|Weight, kg from PVC 1100 gr per sq.m||27 (boat skin)+22 (floorboards)|
|warranty period on inflatable tubes||2 years|
pin style oar lock
Jeannine 330 - 3 persons inflatable motor tender. It is longer than Jeannine 280 but some cheaper and lightweigt.The weight is distributed on 2 packings 27+24 kg. 4 floorboards form a continuous flooring. It is a component of boat rigidity.
Thanks to rigidity of a design running characteristics of a boat are better then in flat-bottom J300. The boat is more obedient in turns, lateral slippage during turning is minimal. Jolting on a wave is less, than in flat-bottom boats. However this tender already requires deck assemblage before launch.
4 floorboards form a continuous flooring. It is a component of boat rigidity. Floorboards can be mounted and disassembled without efforts (flooring sections are enframed with aluminum male and female shape. Assemblage to readiness occupies no more than 15-20 minutes.
2 seats and 4 floor sections of motor boat are made from the water-resistant laminated plywood. Florboards and thwatrs are packed in a separate bag that prevents boat skin abrasion damage against rigid part at packing and transportation.
Thwarts are fixed enough highly that the pose for sitting is convenient. The back will get tired less at lasting many hours stay on swell wave.
Tender unsinkability is provided by splitting of a inflatable buoyancy tube into 3 independent sections. The boat has good stability thanks to width and increased diameter tube. As befits, the safety rope is around buoyancy tube of the tender.
The tender is convenient for carring both three together, or together. There are 3 firm handles on tube (one on a bow and two on stern, at the transom). If to do carring together, one person must be at a bow, another grasps at apertures in transom.
Anything from obligatory accessories of a boat it is not missed. There are water drain hole with plug, 2 pair of clamps for fixing of oars on boat, the towing and anchor rings - all is available. There is convenient, but an unessential addition under standards: directing for anchor or mooring line on a bow of a tender, which protects a inflatable tube from abrasion by the rope).
Equipped with 10 hp outboard this boat for few seconds takes out on plane 2 persons. Its course is stable, splashes formation is minimum, because of correct form of inflatable keel. The tender not yawing during the motion among the waves.
|Standard equipment: boat comes with a 5 l foot pump, pump adapter, 2 oars with the holders in the oarlock, repair kit, printed user’s manual.|
|Optional boat accessories: bimini top, bow bag for the tackle, the bag-pad (this bag is hung up under the thwart, serves as the cushiony mat on thwart), life vest, mooring cables, boat anchor...Look at boat accessories|
Pike fishing from a boat on river
lucky boat is successful fishing
snazz up your leisure with classy inflatable boat
inflatable tender J300 is a very elegant boat.
On photo: tender planes easy across the river with Suzuki 6 h.p. outboard
|Last modified in November 2012
©2000-2022 Fiord-Boat inflatable tenders from European (Ukrainian) manufacturer